Honeywell CT3200 Owner's Manual - Page 13
Programming tips
View all Honeywell CT3200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Program period WAKE LEAVE RETURN SLEEP Description The time when you get up and get ready to leave your home. You can set the system at a comfortable temperature for this period. The time when you are regularly away from home. You can set up an energy-saving temperature for this period. The time between returning home and going to bed. You can set the system at a comfortable temperature for this period. The time when you are sleeping. You can set up an energysaving temperature for this period. When available Weekdays and weekend Weekdays only Weekdays only Weekdays and weekend Programming tips • You do not need to program times and temperatures for all program periods. If you decide not to program your thermostat, it will automatically control heating at 68°F (20°C), and cooling at 78°F (26°C), 24 hours a day. If you decide not to program weekend schedules, the temperature that is programmed for the weekday SLEEP schedule will remain in effect until the next program period, which begins on Monday morning. • The temperatures cannot be set any higher than 88°F (31°C) or any lower than 45°F (7°C). • When pressing the buttons, use the ball of your finger or a soft pencil eraser. Use of sharp fingernails or pencil points can damage the keypad. • If you make an error at any time during programming, press period where you left off. . Then press until you reach the program 69-0653-6 PROGRAMMING 13