Honeywell DH65DG115 User Guide - Page 11
Cleaning
View all Honeywell DH65DG115 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
TrueDRY DH65 Cleaning On an annual basis, maintenance is required to ensure TrueDRY runs at peak efficiency. Unplug TrueDRY DH65 before beginning ser- 1 vice. Grip and remove thumb screws (4 per collar) and slide collars off. Grip filter tab at bottom to remove. 2 Replace with new filter. M27334 Using a 1/2-in. hex drive or standard screw- Check the drain connection and drain line 3 driver, remove the eight screws on either side of the TrueDRY DH65. The side and 4 to ensure it is clear of debris and sludge. Ensure all hose connections are secure once top panels can then be removed. Using a maintenance of the drain lines is complete. damp cloth, wipe excess dust and debris from blower, refrigerant coils, and compres- sor coils. Reattach panels and collars when finished. 69-2089EFS_D.indd 9 When service is complete, initiate a call for 5 dehumidification and check that the compressor and fan activate. If using the digital VisionPRO IAQ or TrueIAQ controls, reset maintenance reminders. M27335 9 69-2089EFS-08 9/22/2008 10:02:41 AM