Honeywell HCCM474M User Manual - Page 20

AWC PRESET WHITE BALANCE, White Balance Completed, MANUAL Manual white balance

Get Honeywell HCCM474M PDF manuals and user guides View all Honeywell HCCM474M manuals
Add to My Manuals
Save this manual to your list of manuals

Page 20 highlights

MAIN MENU, CONTINUED AWC (PRESET WHITE BALANCE) With a white object present in the scene, press SET then position the cursor at White Balance and set to AWC. Setting the preset white balance takes several seconds and the selection is complete when the message "White Balance Completed" displays on the screen. If the selection is not completed in approximately 5 seconds, press the SET button again. Note : To avoid failure of the AWC mode setting, do not move the camera or object until the "white balance completed" message appears. MANUAL (Manual white balance) 1. Press SET to set Manual White Balance when the cursor is positioned at White Balance and the mode is MANUAL. 2. Press the left, right, up, or down direction buttons to control the Red/Blue gain. 3. After setting, press SET to return to the MAIN MENU. MANUAL WHITE BALANCE Red 00 Blue 00 Press SET to Main Menu Gain level is from 0 to 20. REV. B 20 HCMU000878 12/29/03

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
REV.
B
20
HCMU000878
12/29/03
MAIN MENU, CONTINUED
AWC (PRESET WHITE BALANCE)
With a white object present in the scene, press SET then position the cursor at White Balance and
set to AWC.
Setting the preset white balance takes several seconds and the selection is complete when the
message
"White Balance Completed"
displays on the screen. If the selection is not completed in
approximately 5 seconds, press the SET button again.
MANUAL (Manual white balance)
1.
Press SET to set Manual White Balance when the cursor is
positioned at White Balance and the mode is MANUAL.
2.
Press the left, right, up, or down direction buttons to control
the Red/Blue gain.
3.
After setting, press SET to return to the MAIN MENU.
Note :
To avoid failure of the AWC mode setting, do not move
the camera or object until the “white balance completed”
message appears.
Gain level is from 0 to 20.
MANUAL WHITE BALANCE
Red
00
Blue
00
Press SET to Main Menu