Honeywell HCCM474M User Manual - Page 22

MAIN MENU, CONTINUED BLC Zone Setting Backlight control uses 6 sensing zones. The BLC Zone setting is activated on the screen with either the left or right button to allow the most suitable area to be selected while observing the monitor. Position the cursor at Back Light and press SET to select the BLC zones. Decide on BLC zone numbers for desired portions of the scene. Zone 1 Off Zone 2 Off Zone 5 Zone 6 Zone 5 Off ON Off Zone 3 Off Zone 4 Off 1. Press SET to display the BLC zone set. 2. Press the up or down direction buttons to move the cursor to desired BLC zone. 3. Press the left or right direction buttons to set the sensing zone in which you want to preserve visibility in important sections of the scene. 4. After setting, press SET to return to the MAIN MENU. REV. B 22 BLC ZONE SET ➔ Zone Display Zone 1 :OFF Zone 2 :OFF Zone 3 :OFF Zone 4 :OFF Zone 5 :OFF Zone 6 :ON Press SET to View Zone BLC ZONE SET Zone Display ➔ Zone 1 :ON Zone 2 :OFF Zone 3 :OFF Zone 4 :OFF Zone 5 :OFF Zone 6 :ON Press SET to Main Menu HCMU000878 12/29/03