Honeywell HCCM474M User Manual - Page 25
Line Lock Phase Adjustment
View all Honeywell HCCM474M manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
MAIN MENU, CONTINUED LINE LOCK PHASE ADJUSTMENT 1. Press SET to adjust line-lock phase when the cursor is at SYNC MODE and the mode is set to L.L. 2. Press the left or right direction button to adjust line-lock phase. Phase adjustment range is from 0 to 270°. After setting, press SET to return to the MAIN MENU. LINE LOCK PHASE ➔ Phase 135 degree Press SET to MAIN Menu. Note : In the line-lock setting, the camera's vertical synchronization can be driven by the 60Hz AC (50Hz PAL) signal in the power lines. • In the line-lock mode, synchronization may not be corrected for a few seconds after the power is turned on ; this is not a malfunction. • If horizontal lines rolling upward or down ward are observed on the screen, and reversed the polarity of the power cable connected to the power input connector. • When AC power line frequency is of 50Hz (60Hz PAL), the line-lock sync operation is not possible. REV. B 25 HCMU000878 12/29/03