Honeywell HW7500E Service Manual - Page 44

ENGINE AND ALTERNATOR 9.2 ENGINE AND ALTERNATOR A-END COVER 4 N•m (3 lb. ft.) B-ROTOR BOLT Use oil before replacing the rotor bolt. C A B F E D I C-ALTERNATOR HOUSING BOLTS 48 N•m (35 lb. ft.) D-REAR BEARING CARRIER AND STATOR See CARBURETOR, page 9-7. E-ROTOR See ROTOR, page 9-5. F-ENGINE Contact an authorized service dealer for engine maintenance and repairs. Cylinder Head Bolts - 48 N•m (35 lb. ft.) G-VIBRATION ISOLATORS Insert tabs into holes. Check rubber is not chipped, hardened, or worn. Refer to illustration for proper positioning. NOTE: On some models there are only 4 vibration isolators instead of 6. H-FRAME See WHEEL, LEG, & HANDLE ASSEMBLY, page 9-11. I- CRANKCASE COVER 28 N•m (21 lb. ft.) H G 9-2 www.honeywellgenerators.com Honeywell Portable Electrical Generator Service Manual