Honeywell T7516B Owner's Manual - Page 50
Entering Price Response Programming
View all Honeywell T7516B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
With an appliance, the APPL indicator lights with either an ON or an OFF indication. With APPL set to OFF at a particular price, when the price reaches that level, the appliance load turns off, ignoring the program schedule. The water indicator works identically to the appliance indicator with one exception: when the RSVP price is low the water indicator is always on. NOTE: Price Response programming does not affect temperature, water, or appliance holds. For example, if you want your home heated to 72° during low rate, but are willing to allow the temperature down as low as 70° during high rate, your heat offset for rate H (high) is -2 (72° -2° = 70°). If you do not enter an offset, the offset remains as shown in Table 2. If you program an incorrect offset, press and release the Clear key. This changes the offset on the display to zero. The Clear key works for all programmable rates. Entering Price Response Programming Price Response programming is very similar to the other programming. One primary difference is that you can program the temperature offsets and water/appliance setting changes from the same display. The same water and appliance setting changes apply for both heating and cooling. Therefore, they need only be set once. Program them from either the heating or the cooling offset display. The following programming instructions-both heating and cooling- detail this process. 50 69-1611