Hotpoint RGA724EKWH Installation Instructions - Page 23

Installation Instructions FOR YOUR SAFETY Do not store or use combustible materials, gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance. If you smell gas: 1 Open windows. 2 Don't touch electrical switches. 3 Extinguish any open flame. 4 Immediately call your gas supplier. TOOLS YOU WILL NEED Phillips screwdriver Flat-blade screwdriver 3/16″ or smaller Open-end or adjustable wrench Pencil and ruler Level Pliers PART INCLUDED Pipe wrenches (2) (one for backup) Drill, awl or nail 5/16″ Nut driver MATERIALS YOU MAY NEED • Gas line shut-off valve • Pipe joint sealant or UL-approved pipe thread tape with Teflon* that resists action of natural and LP gases • Flexible metal appliance connector (1/2″ I.D.) A 5-foot length is recommended for ease of installation but other lengths are acceptable. Never use an old connector when installing a new range. • Flare union adapter for connection to gas supply line (3/4″ or 1/2″ NPT x 1/2″ I.D.). • Flare union adapter for connection to pressure regulator on range (1/2″ NPT x 1/2″ I.D.) • Liquid leak detector or soapy water. • Lag bolt or 1/2″ O.D. sleeve anchor (for concrete floors only). • Long matches and/or match holder (for models equipped with standing pilots). *Teflon: Registered trademark of DuPont Anti-tip bracket kit 23