Hunter 40170 Owner's Manual - Page 15

Installing The Wall Plate - how to install a thermostat

Get Hunter 40170 PDF manuals and user guides View all Hunter 40170 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 15 highlights

installing the thermostat, cont. INSTALLING THE WALL PLATE 2. Position the new thermostat on the wall and pull the labeled wires through the opening. 3. If the existing holes do not match those on the Hunter wall plate, or if there are no existing holes, level the thermostat and mark the wall for two holes. 4. Remove the thermostat and drill two 3/16" holes where marked. 5. Tap the plastic anchors into the holes until they are flush with the wall. 6. Reposition the thermostat on the wall, pulling the wires through the opening. Insert the mounting screws through the mounting holes and into the anchors. Verify that the thermostat is visually level and securely tighten both screws. 15

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
1²
2. Position the new thermostat on the wall and pull the
labeled wires through the opening.
3. If the existing holes do not match those on the Hunter
wall plate, or if there are no existing holes, level the
thermostat and mark the wall for two holes.
4. Remove the thermostat and drill two 3/16” holes where
marked.
5. Tap the plastic anchors into the holes until they are flush
with the wall.
6. Reposition the thermostat on the wall, pulling the
wires through the opening. Insert the mounting screws
through the mounting holes and into the anchors. Verify
that the thermostat is visually level and securely tighten
both screws.
INSTALLING THE THERMOSTAT, CONT.
INSTALLING THE WALL PLATE