Hunter 40170 Owner's Manual - Page 28
My system continues to operate when the thermostat, is in the off position.
View all Hunter 40170 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
1. My heating or cooling will not turn on or off. 1 a. Check the HE/HG switch to ensure it is set to the correct position. 1 b. Wait. There may be as much as a 4-minute delay before the system turns on or off to protect the compressor. 1 c. Check the circuit breakers and switches to ensure there is enough power to the system. 1 d. Replace the batteries with fresh AA alkaline batteries. 1 e. If applicable, make sure the furnace blower door is closed properly. 1 f. If your system has 4 wires, ensure the jumper wire is installed between the RC and RH terminals. 2. My system continues to operate when the thermostat is in the off position. 2 a. Replace unit. 28
28
1. My heating or cooling will not turn on or off.
1 a. Check the HE/HG switch to ensure it is set to the correct position.
1 b. Wait. There may be as much as a 4-minute delay before the system
turns on or off to protect the compressor.
1 c. Check the circuit breakers and switches to ensure there is enough
power to the system.
1 d. Replace the batteries with fresh AA alkaline batteries.
1 e. If applicable, make sure the furnace blower door is closed properly.
1 f. If your system has 4 wires, ensure the jumper wire is installed
between the RC and RH terminals.
.............................................................................................
2. My system continues to operate when the thermostat
is in the off position.
2 a. Replace unit.