Hunter 40170 Owner's Manual - Page 9
wires from the wall. - thermostat wiring
View all Hunter 40170 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
uninstalling the existing unit 1. Turn the system power OFF from the existing thermostat. Turn the power to the HVAC system OFF at the main power panel or at the furnace. 2. Remove the existing thermostat cover to access the wires from the wall. (Some thermostats may have multiple covers, screws or other locking devices that must be removed or disengaged.) 3. Locate, but do not disconnect the wires. (If wires are not visible, they may be connected to the back of the wall plate. Some models may have doors that open to expose the wires and mounting screws.)
9
1. Turn the system power OFF from the existing
thermostat. Turn the power to the HVAC system OFF
at the main power panel or at the furnace.
2. Remove the existing thermostat cover to access the
wires from the wall.
(Some thermostats may have multiple covers, screws or other
locking devices that must be removed or disengaged.)
3. Locate, but do not disconnect the wires.
(If wires are not visible, they may be connected to the back of the
wall plate. Some models may have doors that open to expose the
wires and mounting screws.)
UNINSTALLING THE EXISTING UNIT