Hunter 40170 Owner's Manual - Page 23
the thermostat. Select
View all Hunter 40170 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Operation 1. Set the Set Temperature slider to the desired temperature. 2. The System Switch determines the operating mode of the thermostat. Select Cool, Off, or Heat. 3. The Fan Switch should normally be located in the Auto position. To run the fan continuously, slide the Fan Switch to the On position. Note: In Auto , The fan will be turned on along with normal operation of your system. In a normal gas or oil furnace, the fan will be turned on by your furnace after its warm-up delay. 23
2±
OPERATION
1. Set the
Set Temperature slider
to the desired
temperature.
2. The
System Switch
determines the operating mode of
the thermostat. Select
Cool, Off,
or
Heat.
3. The
Fan Switch
should normally be located in the
Auto
position. To run the fan continuously, slide the
Fan Switch
to the
On
position.
Note: In
Auto
, The fan will be turned on along with
normal operation of your system. In a normal gas or oil
furnace, the fan will be turned on by your furnace after
its warm-up delay.