Husqvarna M-ZT 52 Operation Manual - Page 22

Tracking Knob, Fuses, A, Primary fuse

Get Husqvarna M-ZT 52 PDF manuals and user guides View all Husqvarna M-ZT 52 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 22 highlights

CONTROLS Tracking Knob If the mower is not tracking straight, check the air pressure in both rear tires. Recommended air pressure for the rear tires is 15 psi (1 bar). 1. Tracking adjustments are made using the tracking bolt and tracking knob. The tracking bolt and tracking knob act as limiting devices for the motion control levers when in the full-forward position. 2. For preliminary tracking adjustment, move unit to an open, unobstructed area such as an empty parking lot or open field. 3. Back the tracking bolt out until flush with nut. 4. Loosen tracking knob out until flush with nut. 5. Test operate unit by driving it at full throttle and the full forward position on both motion control levers. Gradually turn in the tracking bolt on the right hand side until the unit noticeably starts drifting right. 6. Drive forward at full throttle with both motion control levers in the full forward position. Gradually turn in the tracking knob (left side) until unit tracks straight. Tracking adjustment Fuses Fuses are located on the left hand side of the machine. They are accessed by tilting the seat forward. Fuses are flat pin fuses type as used in automobiles. There are two fuses with ratings and functions: • 20 A, Primary fuse • 7.5 A, Mower deck coupling Fuses 8058-224 8050-082 22

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
22
CONTROLS
Tracking Knob
If the mower is not tracking straight, check the air
pressure in both rear tires. Recommended air pressure
for the rear tires is 15 psi (1 bar).
1.
Tracking adjustments are made using the tracking
bolt and tracking knob. The tracking bolt and
tracking knob act as limiting devices for the motion
control levers when in the full-forward position.
2.
For preliminary tracking adjustment, move unit
to an open, unobstructed area such as an empty
parking lot or open field.
3.
Back the tracking bolt out until flush with nut.
4.
Loosen tracking knob out until flush with nut.
5.
Test operate unit by driving it at full throttle and the
full forward position on both motion control levers.
Gradually turn in the tracking bolt on the right hand
side until the unit noticeably starts drifting right.
6.
Drive forward at full throttle with both motion
control levers in the full forward position. Gradually
turn in the tracking knob (left side) until unit tracks
straight.
8058-224
Tracking adjustment
Fuses
Fuses are located on the left hand side of the machine.
They are accessed by tilting the seat forward. Fuses
are flat pin fuses type as used in automobiles.
There are two fuses with ratings and functions:
•
20 A, Primary fuse
•
7.5 A, Mower deck coupling
8050-082
Fuses