IBM 62174DU Installation Guide - Page 50
Installing, security - stock
UPC - 000435924971
View all IBM 62174DU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Power supply alignment flange Locking lip 1394 Air baffle a. Orient the air baffle as shown and align it with the side of the power supply. b. Insert the small end of the baffle into the computer toward the front of the computer. c. Lower the larger end of the baffle until the side flange rests on the power supply. d. Slide the baffle toward the rear of the computer until it stops and the rear flange (locking lip) is inside the computer chassis; then, press down on the large end of the baffle until it clicks into place. 18. If you have other options to install or remove, do so now. Otherwise, replace the support bracket (see "Removing and installing the support bracket" on page 17); then, go to "Completing the installation" on page 40. Installing a security rope clip To help prevent hardware theft, you can add a security rope clip and cable to your computer. After you add the security cable, make sure that it does not interfere with other cables that are connected to the computer. Before you begin, obtain the following items: v A flat-blade screwdriver v An adjustable wrench v A 19 mm (0.75 in.) rope clip or wire rope (similar to National Manufacturing number 3230, stock number 176-735) v Threaded nuts that fit the rope clip v A security cable v A lock, such as a combination lock or padlock To install a rope clip, complete the following steps: 1. Turn off the computer and all attached devices. 2. Disconnect all external cables and power cords; then, remove the side cover (see "Removing the cover" on page 16). 38 IntelliStation A Pro Type 6217: Installation Guide