Icom IC-718 Instruction Manual - Page 56
Specifications
View all Icom IC-718 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
11 SPECIFICATIONS D General • Frequency coverage : Receive 0.03-29.999999 MHz*1 Transmit 1.800- 1.999999 MHz*2 3.500- 3.999999 MHz*2 7.000- 7.300000 MHz 10.100-10.150000 MH 14.000-14.350000 MHz 18.068-18.168000 MHz 21.000-21.450000 MHz 24.890-24.990000 MHz 28.000-29.700000 MHz *1Guaranteed range: 0.5-29.999999 MHz *2Varies according to version • Mode : USB, LSB, CW, RTTY, AM, • Number of memory : 101 (99 regular, 2 scan edges) channels • Frequency stability : Less than ±200 Hz from 1 min. to 60 min. after power on. After that rate of stability less than ±30 Hz/hr. at +25°C (+77°F). Temperature fluctuations 0°C to +50°C (+32°F to +122°F) less than ±350 Hz. • Power supply requirement : 13.8 V DC ±15% (negative ground) • Current drain (at 13.8 V DC) : Receive Standby 1.3 A Max. audio 2.0 A Transmit Max. power 20.0A • Operatable temp. range : -10°C to +60°C; +14°F to +140°F • Antenna connector : SO-239 (50 Ω) • Dimensions : 240(W) × 95(H) × 239(D) mm (projections not included) 97⁄16(W) × 33⁄4(H) × 913⁄32(D) in • Weight (approx.) : 3.8 kg; 8 lb 6 oz • ACC connector : 13-pin • REMOTE connector : 2-conductor 3.5 (d) mm (1⁄8˝) • Spurious emissions : Less than -50 dB below peak output power *Spurious freq.; below 30 MHz: -50 dB, above 30 MHz: -60 dB • Carrier suppression : More than 40 dB • Unwanted sideband : More than 50 dB • Microphone connector : 8-pin connector (600 Ω) • Key connector : 3-conductor 6.5 (d) mm (1⁄4˝) • SEND/ALC connector : Phono (RCA) D Receiver • Receive system : Double-conversion superheterodyne system • Sensitivity SSB, CW, RTTY AM : 0.16 µV (1.8-29.999999 MHz) 13 µV (0.5-1.799999 MHz) 2 µV (1.8-29.999999 MHz) • Squelch sensitivity (threshold): SSB, CW, RTTY Less than 5.6 µV • Selectivity : SSB, CW, RTTY More than 2.1 kHz/-6 dB Less than 4.5 kHz/-60 dB AM More than 6 kHz/-6 dB Less than 20 kHz/-40 dB • Spurious and image rejection ratio: More than 70 dB (1.8-29.999999 MHz) • RIT variable range : ±1200 Hz • Audio output power : More than 2.0 W at 10% (at 13.8 V DC) distortion with an 8 Ω load • PHONES connector : 3-conductor 6.35 (d) mm (1⁄4˝) • External SP connector : 2-conductor 3.5 (d) mm (1⁄8˝)/8 Ω D Transmitter • Output power SSB, CW, RTTY AM • Modulation system SSB AM : 2-100 W 2-40 W : Balanced modulation Low level modulation 54 All stated specifications are typical and subject to change without notice or obligation.