Icom IC-M72 Instruction Manual - Page 11

PANEL DESCRIPTION 3 y TRANSMIT POWER/LOCK KEY [H/L•LOCK] • Selects high, middle or low power when pushed. (p. 9) • Toggles the lock function ON/OFF when pushed and held for 1 sec. (p. 10) u SCAN KEY [SCAN•DUAL] • Starts and stops normal or priority scan when pushed. (pgs. 14, 15) • Enters watch mode when pushed and held for 1 sec. (p. 16) i CHANNEL/WEATHER CHANNEL KEY [CH/WX•U/I/C] • Selects and toggles the regular channels and weather channel when pushed. (p. 8) • Selects the U.S.A, International, or Canadian* channel group when pushed and held for 1 sec. (p. 8) - The function display shows which channel group is ac- tive. *Available with the USA versions only. • Push to return to the condition before selecting the chan- nel when the priority channel or the call channel is se- lected. o SPEAKER-MICROPHONE CONNECTOR [SP MIC] Connects the optional external speaker-microphone or headset. NOTE: Attach the [SP MIC] cap when the optional speaker-microphone or headset is not used. !0 ANTENNA CONNECTOR Connects the supplied antenna. Function display q !5 !4 !3 !2 !1 !0 o w 3 e r t y u i q CHANNEL NUMBER READOUT • Indicates the selected operating channel number. • In SET mode, indicates the selected condition. • "DUP" appears when a duplex channel is selected. w TAG CHANNEL INDICATOR (p. 15) Appears when TAG channel is selected. e BATTERY INDICATOR Indicates remaining battery power. Indication Battery level Full Middle Charging required No battery blinks when the battery is overcharged (or over voltage). 5