Icom IC-M72 Instruction Manual - Page 23

7 SET MODE SET mode programming SET mode is used to change the condition of 18 transceiver functions: beep tone function, weather alert function, scan type, scan resume timer, auto scan function, dual/tri-watch function, monitor key action, backlighting function, LCD contrast selection, auto power save function, self check function, battery voltage indication, squelch sensitivity, channel name scroll type, scroll speed, scrambler code, VOX gain and VOX delay. D SET mode operation q Turn power OFF. w While pushing and holding [ ], turn power ON to enter the SET mode. • "BEEP" (Beep tone function setting) appears. e Push [ ], or push [ ]] and [Y]/[Z] to select the de- sired item. 6 r Push [Y]/[Z] to select the desired condition of the item. t To exit the SET mode, push [16•9]. 7 D SET MODE ITEMS Beep tone* Scan type‡ Scan resume timer‡ Auto scan start function‡ Dual/Tri-watch‡ VOX delay VOX gain Voice scrambler code† Monitor key action : Push [ ], or while pushing and holding [ ], push [Y] : While pushing and holding [ ], push [Z] *Starting item †Availability may differ according to versions. ‡Not available with Dutch versions. Display backlight LCD contrast Power save function Scroll speed Channel name scroll type Squelch sensitivity Battery voltage indication Self-check function 17