Icom IC-M72 Instruction Manual - Page 18
VOX function, AquaQuake water draining function, Channel naming - vhf
View all Icom IC-M72 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
4 BASIC OPERATION VOX function NOTE: An optional headset and optional headset adapter are required for the VOX operation. The VOX function (voice operated transmission) starts transmitting when you speak into the headset's microphone. There is no need to push [PTT]. The IC-M72 automatically returns to receive mode when you stop talking. ➥ Push and hold [ ], then push [H/L•LOCK] to turn the VOX function ON or OFF while connecting the headset and optional headset adapter to [SP MIC] connector. • "VOX" appears on the LCD while the VOX function turns ON. • The VOX gain and VOX delay can be set on the SET mode. (p. 22) • During scan, dual/tri-watch or on a transmission inhibited channel, the VOX function will not be activated. AquaQuake water draining function The IC-M72 uses a new technology to clear water away from the speaker grill: AquaQuake. AquaQuake helps drain water away from the speaker housing (water that might otherwise muffle the sound coming from the speaker). The IC-M72 emits a vibrating noise when this function is being used. ➥ Push and hold both [16•9] and [H/L•LOCK]. • A low beep tone sounds for 9 sec. to drain water, regardless of [VOL] control setting. • The transceiver never accepts a key operation while the AquaQuake function is activated. And this function won't be activated when an optional speaker-microphone or headset is connected. 12 Channel naming The IC-M72 has a capability to assign up to 10-character channel names or comments for each operating channel, including each weather channel. This provides easy recognition of channel usage, or station names, etc. When shipped from the factory, the IC-M72 is programmed with default names for each VHF marine channel. These defaults can be changed, if desired. You may replace the factory-set opening comment with a comment of your own. The opening comment appears each time the IC-M72 is powered ON. The comment may be up to 16 characters long. D Available characters 0) (1) (2) (3) (4) (5) (6) (7) (8) (9) (Space) (A) (B) (C) (D) (E) (F) (G) (H) (I) (J) (K) (L) (M) (N) (O) (P) (Q) (R) (S) (T) (U) (V) (W) (X) (Y) (Z) (a) (b) (c) (d) (e) (f) (g) (h) (i) (j) (k) (l) (m) (n) (o) (p) (q) (r) (s) (t) (u) (v) (w) (x) (y) (z)