Icom IC-T70A HD Instruction Manual - Page 33
Duplex operation, Reverse duplex function
View all Icom IC-T70A HD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
5 REPEATER AND DUPLEX OPERATIONS ■ Duplex operation D Setting frequency offset q P ush [SET] to enter the Set mode. w R otate [DIAL] to select the frequency offset set item, then rotate [VOL] to set the frequency offset. e P ush [V/M/C] to return to the frequency display. [DIAL] [VOL] Frequency offset setting 0.6 MHz offset D Setting duplex direction ➥ Push and hold [DUP](M) for 1 sec. to select "DUP-" (negative offset) or "DUP" (positive offset). • "DUP-" or "DUP" indicates the transmit frequency for minus shift or plus shift, respectively. • While continuing to push [DUP](M), rotate [DIAL] also selects a duplex setting. • When the frequency offset is 0.6 MHz [DIAL] -Duplex example Receiving Transmitting +Duplex example 1 U.S.A. and Korean versions: 2 The auto repeater function has priority over the manual duplex setting. If the transmit frequency changes after setting, the 3 auto repeater function may have changed the duplex setting. 4 Turn the auto repeater function OFF to prevent this (p. 27). 5 ■ Reverse duplex function 6 7 When the reverse duplex function is ON, the receive and transmit frequencies are reversed. The function can be set in 8 the Set mode. 9 q Push [SET] to enter the Set mode. w R otate [DIAL] to select the reverse duplex set item, then 10 rotate [VOL] to turn the function ON or OFF. 11 12 Reverse duplex setting 13 e Push [V/M/C] to return to the frequency display. 14 Each receive and transmit frequency is shown in the table 15 below, with the following configurations; 16 Input freq.: 145.300 MHz, Direction: - (down), Offset: 0.6 MHz 17 Reversed RX freq. TX freq. • "DUP-" or "DUP" blinks OFF 145.300 MHz 144.700 MHz when the reverse duplex 18 function is ON. ON 144.700 MHz 145.300 MHz 19 26