Icom IC-T70A HD Instruction Manual - Page 72
Other Functions
View all Icom IC-T70A HD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
10 OTHER FUNCTIONS ■ Programming a DTMF code sequence DTMF codes are used for autopatching, accessing repeaters, controlling other equipment, etc. The transceiver has 16 DTMF memory channels (d0-d9, dA, db, dC, dd, dE, dF) for storage of often-used DTMF codes of up to 24 digits. q P ush [SET] to enter the Set mode. w R otate [DIAL] to select the DTMF programming item. e R otate [VOL] to select a desired DTMF memory channel. • If programmed, previously programmed the DTMF code is displayed. [DIAL] [VOL] t R otate [DIAL] to select the characters. • "0"-"9," "A," "b," "C," "d," "E" and "F" are selectable. • Up to 24 digits can be programmed. • Push [BAND] to move the cursor right; push [SET] to move the cursor left. y R epeat step t until the desired code is input. [DIAL] Blank channel indication DTMF memory channel r P ush and hold [SET] for 1 sec. to enter the programming mode. The cursor is blinking during programming mode. 65 Next display appears after 6th digit has been input. : 1st display : 3rd display : 2nd display : 4th display • If a digit is mistakenly programmed, push [SET] (or [BAND]) repeatedly to select the digit, then rotate [DIAL] to correct it. Or rotate [DIAL] to select "_" to erase on and after the digits. Programmed memories will be cleared by this operation on the 1st digit. u P ush [BAND] twice to program the DTMF code and exit the programming mode. • After the 24th digit is input, the transceiver automatically stores the code sequence and returns to step e. i Push [V/M/C] to return to the frequency display.