Icom IC-T70A HD Instruction Manual - Page 56
Priority watch operation
View all Icom IC-T70A HD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
8 PRIORITY WATCH ■ Priority watch operation D Memory/call channel and memory scan watch q Select the VFO mode, then set an operating frequency. w Select the channel(s) to be watched. For memory channel watch: Select a desired memory channel. For call channel watch: Select a desired call channel. For memory scan watch: ➥ Select the memory mode, or a desired bank group. ➥ Push and hold [SCAN](H/M/L) for 1 sec. to enter the scan type selection mode. ➥ Rotate [DIAL] to select a desired scan type, then push [SCAN](H/M/L) again to start the memory/bank scan. e P ush [SET] to enter the Set mode. r R otate [DIAL] to select the priority watch set item, then rotate [VOL] to select "On." • Select "bELL" if the priority beep function is desired. • During priority watch Monitors VFO frequency for 5 seconds. Pauses on a memory or call channel when a signal is received. • During priority watch with priority beep A beep tone sounds and "S" icon blinks when a signal is received on a memory or call channel. t P ush [V/M/C] to exit the Set mode and start the watch. • The "PRIO" icon appears. • The transceiver checks the memory/bank channel(s) or call channel every 5 seconds. • The watch resumes according to the selected scan resume setting. (p. 47) y P ush [V/M/C] to cancel the watch. 49