Icom IC-T70A HD Instruction Manual - Page 76
Setting DTCS code for DTCS squelch, Setting DTCS polarity
View all Icom IC-T70A HD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
10 OTHER FUNCTIONS ■ Tone frequency and DTCS code (continued) D Setting DTCS code for DTCS squelch q P ush [SET] to enter the Set mode. w R otate [DIAL] to select the DTCS code item. [DIAL] D Setting DTCS polarity q P ush [SET] to enter the Set mode. w R otate [DIAL] to select the DTCS polarity item. [DIAL] e R otate [VOL] to select a desired DTCS code. • Each operating band and each memory channel have independent settings. • See page 53 for available DTCS codes for details. r Push [V/M/C] to return to the frequency display. DTCS phase can be selected in the "dtCS P" item. See next content for more details. e R otate [VOL] to select a desired DTCS polarity mode. • both n : Normal phase is used for both TX and RX. (Default) • tn-RR : Normal phase is used for TX; Reverse phase for RX. • tR-Rn : Reverse phase is used for TX; Normal phase for RX. • both R : Reverse phase is used for both TX and RX. r Push [V/M/C] to return to the frequency display. 69