Icom IC-T70A HD Instruction Manual - Page 88
DVOX-related settings
View all Icom IC-T70A HD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
13 OPTIONS D VOX-related settings The VOX gain, the VOX delay, and the VOX time-out timer can be set in the Set mode. q C onnect an optional headset and plug adapter cable to the transceiver, and then turn the power ON. w P ush [SET] to enter the Set mode. e R otate [DIAL] to select the VOX gain (VOX LV), the VOX delay (VOX.dLy), or the VOX time-out timer (VOX.tot) item. r R otate [VOL] to select a desired option. t Push [V/M/C] to exit the Set mode. The VOX function does not activate transmission while in the Set mode. • VOX gain The VOX gain level can be adjusted between 1 (minimum) and 10 (maximum), or turned OFF. Higher values make the VOX function more sensitive to your voice. (default: 5) • VOX delay Sets the VOX delay to between 0.5 and 3.0 seconds (in 0.5 sec. steps). The VOX delay is the amount of time the transmit- ter stays ON after you stop speaking. (default: 0.5) If "VOX" is intermittent, be sure the VOX delay is set long enough to allow normal pauses in speech, but keep the VOX ON until you finish speaking. • VOX time-out timer Sets the VOX time-out timer to between 1, 2, 3, 4, 5, 10 and 15 minutes to prevent accidental prolonged transmission for the VOX function. To turn the function OFF, select "OFF." (default: 3) ➥ While speaking into the headset microphone, adjust the VOX gain until "VOX" continuously appears on the LCD. ✔ CONVENIENT! While transmitting using the VOX function, you can adjust the VOX gain simply by rotating [DIAL]. 81 The VOX time-out timer must be set shorter than the timeout timer, otherwise this timer will not be activated.