Icom IC-T70A HD Instruction Manual - Page 42
Selecting memory/bank, name indication
View all Icom IC-T70A HD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
6 MEMORY/CALL CHANNELS ■ Programming memory/bank/scan name (continued) [EXAMPLE]: Programming the bank name "VHF" into the scan edge channel 1A During memory mode, rotate to select scan edge channel 1A. Push and hold for 1 sec. Push and hold for 1 sec. Rotate to select "V," then push . Enter the select memory write mode. Push repeatedly to select "b nAmE*2." Select "H" and "F" with and . ■ Selecting memory/bank name indication During memory mode operation, either the programmed memory name or bank name can be displayed. q W hile continuing to push [SET], turn the power ON to enter the Initial set mode. w R otate [DIAL] to select the memory name item, then rotate [VOL] to set the memory name display option. • "OFF" : Memory name display is turned OFF. • "On" : Turns ON the memory name display. (default) [DIAL] [VOL] Memory name setting Push and hold for 1 sec. to program. Select "m nAmE" or "S nAmE*1" when programming the memory name or the scan name, respectively. *1 S nAmE can be set for scan edge channels only. *2 b nAmE can be set for bank assigned channels only. 35 e P ush [ ] to return to the frequency display.