Image Fitness 8.25 Elliptical English Manual - Page 9

9. While another person holds the Console (10) near the 9 Upright (2), connect the Upper Wire Harness (18) to the wire harness on the Console. Avoid pinching the wire harnesses 10 Attach the Console (10) to the Upright (2) with four during this step M4 x 16mm Screws (60). Be careful not to pinch the wire harnesses. Attach the Water Bottle Holder (17) to the Upright (2) 18 with two M4 x 25mm Screws (80). Console Wire 2 Harness 60 17 80 10. Orient a Left Upper Body Insert (12) and a Right Upper 10 Body Insert (13) as shown, and press them together around the left Upper Body Leg (6). Next, slide the Left Upper Body Arm (4) onto the Upper Body Inserts. While another person holds the Left Upper Body Arm (4) and the Upper Body Inserts (12, 13), insert an M10 x 50mm Carriage Bolt (75) through all three parts from the inside as shown. Next, tighten four M4 x 32mm Screws (67) and four M4 x 12mm Flat Head Screws (82) through the Left Upper Body Arm and into the Upper Body Inserts. Then, tighten an Arm Knob (11) onto the Carriage Bolt. 4 75 82 Attach the Right Upper Body Arm (not shown) to the right Upper Body Leg (6) in the same way. 82 11 82 6 6 67 82 67 13 12 11. Make sure that all parts of the elliptical exerciser are properly tightened. Place a mat under the elliptical exerciser to protect the floor or carpet from damage. 9