Insignia NS-37D20SNA14 User Manual (English) - Page 20
Using coaxial good
View all Insignia NS-37D20SNA14 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Using coaxial (good) On your TV Coaxial cable connector NS-37D20SNA14/LE-37MY83 Insignia 37" LED TV Side of TV Cable or satellite box ANT/CABLE IN jack Coaxial cable To connect a cable or satellite box using coaxial: 1 Make sure that your TV's power cord is unplugged and all connected equipment is turned off. 2 Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box. 3 Connect a coaxial cable (not provided) to the ANT/CABLE IN jack on the side of your TV and to the coaxial out jack on the cable or satellite box. 4 Plug your TV's power cord into a power outlet, turn on your TV, then turn on the cable or satellite box. 5 Press INPUT to open the INPUT SOURCE list. 6 Press S or T to highlight TV, then press ENTER. 7 If you cannot tune to channels you know exist, scan for channels. See "Automatically scanning for channels" on page 42. Notes • Use a coaxial cable to eliminate interference and noise from radio waves. • Do not bundle the coaxial cable with the power cord or other cables. 16 www.insigniaproducts.com