Insignia NSAV511 User Manual (English) - Page 18

Insignia NS-AV511 Surround Sound Receiver Rocketboost Network Capabilities The maximum number of Rocketboost devices in a Rocketboost Network is nine. If you already have nine and attempt to join an additional device, joining will fail for the new device. Note If you want to remove a device from your Rocketboost network you need to rejoin it to a different hub device (this basically creates a 2nd Rocketboost network). The maximum number of audio streams that can be sent simultaneously on the Rocketboost network is five (stereo CD quality). Installing batteries in the remote control Cautions • If the remote control doesn't work reliably, try replacing the batteries. • Don't mix new and old batteries or different types of batteries. • If you intend not to use the remote control for a long time, remove the batteries to prevent damage from leakage or corrosion. • Remove expired batteries as soon as possible to prevent damage from leakage or corrosion. To install the batteries: 1 Remove the cover. Use the remote control within about 16 feet (5 meters) of the receiver and within 30 degrees of perpendicular to the front of the receiver. Cautions • Do not expose the remote control to shock. In addition, do not expose the remote control to liquids, and do not place in an area with high humidity. • Do not place the remote control under direct sunlight. The heat may cause deformation of the remote control. • The remote control may not work properly if the remote sensor window of the receiver is under direct sunlight or strong lighting. In such a case, change the angle of the lighting or receiver, or operate the remote control closer to the remote sensor window. Configuring speakers (Sp Config menu) This section explains how to specify which speakers are connected and defines their sizes. For speakers with a cone diameter larger than 6.5 inches (16 cm), specify Large (full band). For those with a smaller diameter, specify Small (default crossover 120 Hz). The crossover frequency can be changed in the Crossover submenu. See "Using on-screen setup menus" on page 20 for information on accessing and using the menus. Note Speaker Configuration, Crossover Frequency, and Double Bass settings are disabled while headphones are connected, or when Audio TV OUT is set to On. Batteries (AA/R6) 2 Insert two AA batteries into the compartment matching the polarity indicated. 3 Replace the cover. Using the remote control Use the remote control by pointing it towards the receiver's remote sensor window. Objects between the remote control and sensor window may prevent proper operation. Remote control sensor Receiver Approx. 16 ft. (5 m) Speaker(s) Subwoofer Front Center and Surround Configuration Yes-if a subwoofer is connected. No-If no subwoofer is connected. Small-If speaker cone is 6.5 inches (16 cm) or less in diameter. Large-If speaker cone is larger than 6.5 inches (16 cm) in diameter. Note: If the Subwoofer setting is No, the default setting for this is Large and cannot be changed. Small-If speaker cone is 6.5 inches (16 cm) or less in diameter. Large-If speaker cone is larger than 6.5 inches (16 cm) in diameter. None-If no center speaker is connected. Note: If the Front setting is Small, the Large option cannot be selected. Setting the crossover frequency (Crossover Frequency submenu of Sp Config menu) This setting is recommended for the speakers that you specify as Small. To get the best bass performance from your speaker system, you need to set the crossover frequency according to the size and frequency response of your speakers. Options include 40Hz, 50Hz, 60Hz, 70Hz, 80Hz, 90Hz, 100Hz, 120Hz, 150Hz, and 200Hz. Use the diameter of the smallest speaker in your system when choosing the crossover frequency. 14 www.insigniaproducts.com