Intel DX48BT2 Product Guide - Page 31
Installing and Removing a Processor, Installing a Processor
UPC - 735858199773
View all Intel DX48BT2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Installing and Replacing Desktop Board Components Installing and Removing a Processor Instructions on how to install the processor on the Desktop Board are given below. Installing a Processor CAUTION Before installing or removing a processor, make sure the AC power has been removed by unplugging the power cord from the computer; the standby power LED should not be lit (see Figure 3 on page 22). Failure to do so could damage the processor and the board. To install a processor, follow these instructions: 1. Observe the precautions in "Before You Begin" on page 27. 2. Open the socket lever by pushing the lever down and away from the socket (Figure 8, A and B). Figure 8. Lift the Socket Lever 31
Installing and Replacing Desktop Board Components
31
Installing and Removing a Processor
Instructions on how to install the processor on the Desktop Board are given below.
Installing a Processor
CAUTION
Before installing or removing a processor, make sure the AC power has been removed
by unplugging the power cord from the computer; the standby power LED should not
be lit (see Figure 3 on page 22).
Failure to do so could damage the processor and the
board.
To install a processor, follow these instructions:
1.
Observe the precautions in "Before You Begin" on page 27.
2.
Open the socket lever by pushing the lever down and away from the socket
(Figure 8, A and B).
Figure 8.
Lift the Socket Lever