Intel DX48BT2 Product Guide - Page 33
Remove the Processor from the Protective Processor Cover, Install the Processor
UPC - 735858199773
View all Intel DX48BT2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Installing and Replacing Desktop Board Components 5. Remove the processor from the protective processor cover. Hold the processor only at the edges, being careful not to touch the bottom of the processor (see Figure 11). Do not discard the protective processor cover. Always replace the processor cover if the processor is removed from the socket. Figure 11. Remove the Processor from the Protective Processor Cover 6. Hold the processor with your thumb and index fingers oriented as shown in Figure 12. Make sure your fingers align to the socket cutouts (Figure 12, A). Align notches (Figure 12, B) with the socket (Figure 12, C). Lower the processor straight down without tilting or sliding it in the socket. Figure 12. Install the Processor 33
Installing and Replacing Desktop Board Components
33
5.
Remove the processor from the protective processor cover.
Hold the processor
only at the edges, being careful not to touch the bottom of the processor (see
Figure 11).
Do not discard the protective processor cover. Always replace the
processor cover if the processor is removed from the socket.
Figure 11.
Remove the Processor from the Protective Processor Cover
6.
Hold the processor with your thumb and index fingers oriented as shown in
Figure 12.
Make sure your fingers align to the socket cutouts (Figure 12, A).
Align
notches (Figure 12, B) with the socket (Figure 12, C).
Lower the processor straight
down without tilting or sliding it in the socket.
Figure 12.
Install the Processor