Intel E6750 Design Guidelines - Page 148

Intel Enabled Reference Solution Information Table 7-10. Balanced Technology Extended (BTX) Reference Thermal Solution Providers Supplier Part Description Part Number Contact Phone Notes Mitac International Corp Support and Retention Module _ Michael Tsai 886-3-328-9000 1 Ext.6545 AVC* Type I Thermal DB09238B1 David Chao +886-2-22996930 2 (ASIA Vital Components Co., Ltd) Module Fan Assembly 2004 20084 Extension: 619 AVC* Type II Thermal DB07038B1 David Chao +886-2-22996930 3 (ASIA Vital Components Co., Ltd) Module Fan Assembly 2004 2UP001 Extension: 619 TBD Type II Thermal Module Fan Assembly 65 W 775_VR_CONFI G_06 TBD TBD TBD 4 CCI (Chaun-Choung Technology Corp.) Extrusion TBD Harry Lin Monica Chih 714-739-5797 +886-2-29952666 Extension 131 AVC (ASIA Vital Components Co., Ltd) Fan and Duct TBD David Chao +886-2-22996930 Extension: 619 NOTES: 1. Part numbers were not available at the time of release of this document. Contact the company for part number identification prior to the next revision of this document. 2. The user should note that for the 2004 Type I Intel reference Thermal Module Assembly: also meets 2005 Performance (130 W) and Mainstream (84 W) as well as the 2004 Performance 775_VR_CONFIG_04 (115 W). 3. The user should note that for the 2004 Type II Intel reference Thermal Module Assembly: meets the requirements for 115W 2004 Performance 775_VR_CONFIG_04 and 95 W 2005 Mainstream 775_VR_CONFIG_05. 4. The Type II TMA designed for 65 W 775_VR_CONFIG_06 has been optimized for acoustics and cost. It is not interchangeable with the 95 W Type II reference design. Note: These vendors/devices are listed by Intel as a convenience to Intel's general customer base, but Intel does not make any representations or warranties whatsoever regarding quality, reliability, functionality, or compatibility of these devices. This list and/or these devices may be subject to change without notice. § 148 Thermal and Mechanical Design Guidelines