Intel S2600CP Software User Guide for Windows* - Page 82

Intel® RSTe Command Line Interface (RSTCLI) Utility Overview Table 4. Create Options Flag -C -E -l -n -s -z Name --create Creates a volume and array if one does not already exist. Creates a new volume on an existing array; used to denote Create Mode. --create-from-existing If data is to be migrated from one of the disks, specify the disk with this flag. Disk identifier is SCSI address. --level --name --strip-size --size Size in gigabytes. This is an optional switch. If switch is not used or size is specified to 0, then the maximum size available will be used. Create Examples: -C -l 1 -n Volume 0-1-0-0 0-2-0-0 --create -l 0 -z 5 --name RAID0Volume 0-3-0-0 0-4-0-0 0-5-0-0 -C - 1 -E 0-1-0-0 -n VolumeWithData 0-2-0-0 --create -help 6.1.2 Information The Information option will provide information on arrays, controllers, disks, enclosures and volumes. To obtain the desired information, enter the following: rstcli --information --controller|--array|--disk|--enclosure|--volume {[device]} Table 5. Information Options Flag -I -a -c -d -e -v Name --information Displays controller, array, volume, enclosure, and disk information; used to denote Information Mode. --array Lists information about the arrays on the system. --controller Lists information about the controllers on the system. --disk Lists information about the disks in the system. --enclosure Lists information about the enclosures on the system. --volume Lists information about the volumes on the system when used in Info mode. Stipulates the volume to act on in Modify or Manage. Intel® RSTe User's Guide 73