Intel SBX82 User Guide - Page 26
Turning off the blade server
UPC - 675900686984
View all Intel SBX82 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Turning off the blade server When you turn off the blade server, it is still connected to power through the SBCE unit. The blade server can respond to requests from the service processor, such as a remote request to turn on the blade server. To remove all power from the blade server, you must remove it from the SBCE unit. Shut down your operating system before you turn off the blade server. See your operating-system documentation for information about shutting down the operating system. The blade server can be turned off in any of the following ways: • You can press the power-control button on the blade server behind the control panel door. See "Understanding the control panel and LEDs" on page 13. This starts an orderly shutdown of the operating system, if this feature is supported by your operating system. ✏ NOTE After turning off the blade server, wait at least 5 seconds before you press the powercontrol button to turn on the blade server again. • If the operating system stops functioning, you can press and hold the power-control button for more than 4 seconds to turn off the blade server. • The management module can turn off the blade server. ✏ NOTE After turning off the blade server, wait at least 30 seconds for its hard disk drives or flash drives to stop before you remove the blade server from the SBCE unit. 12 Intel Server Compute Blade SBX82 Installation and User's Guide