Intel SBX82 User Guide - Page 59
Closing the blade server cover
UPC - 675900686984
View all Intel SBX82 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
Closing the blade server cover Important: The blade server cannot be inserted into the SBCE unit until the cover is installed and closed or an expansion unit is installed. Do not attempt to override this protection. The following illustration shows how to close the blade server cover. Cover pins Complete the following steps to close the blade server cover: 1. Read the safety information beginning on page "Safety" on page vii and "Installation guidelines" on page 19. 2. If you removed the blade bezel assembly, replace it now (see "Installing the blade server bezel assembly" on page 44 for instructions). 3. Lower the cover so that the slots at the rear slide down onto the pins at the rear of the blade server, as shown in the illustration. Before closing the cover, check that all components are installed and seated correctly and that you have not left loose tools or parts inside the blade server. 4. Pivot the cover to the closed position, as shown in the illustration, until it clicks into place. 45