Intermec CV61 CV61 Vehicle Mount Computer (Windows XP) User Guide - Page 50
Create and Enable Custom Profile Settings, About Network Communications - antenna
View all Intermec CV61 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Chapter 4 - Configure the Computer For help using Intermec Settings, click Help > Contents. For information on all of the parameters in Intermec Settings, see the Intermec Settings Command Reference Manual. Create and Enable Custom Profile Settings You can create custom profile settings to ensure optimal performance of the CV61 in specific scenarios. Once you create a custom profile setting, enable it with Intermec Settings. Note: For more information on how to create your own custom profiles, go to the Intermec Developer Center website at www.intermec.com/developer/resources/CustomProfiles.aspx 1 Make sure you have created a custom profile for your computer. 2 Tap Start > All Programs > Intermec > Profile Settings. 3 Select the profile you want to enable. About Network Communications You can easily add the computer to your wireless or wired data collection network. You can connect your computer using: • 802.11a/b/g/n radio communications. • Bluetooth communications. • USB and serial communications. Configure 802.11a/b/g/n (Wi-Fi) Radio Communications Make sure all components with antennas are at least 30 cm (1 ft) apart when power is applied. Failure to comply could result in equipment damage. The computer contains an 802.11 radio to transfer data using wireless communications and to support the TCP/IP network protocols. This section of the manual assumes that your wireless network is set up, including your access points. 40 CV61 Vehicle Mount Computer (Windows XP) User Guide