Invacare M94 Owners Manual - Page 36

Splash Screen, Main Screen

Get Invacare M94 PDF manuals and user guides View all Invacare M94 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 36 highlights

SECTION 5-WHEELCHAIR OPERATION Splash Screen NOTE: For this procedure, refer to FIGURE 5.5. This screen is displayed at startup of the joystick for about 2 seconds. This screen displays the software version and date information. After this screen, the joystick displays the Main Screen. FIGURE 5.5 LCD Display Screens - Splash Screen Main Screen NOTE: For this information, refer to FIGURE 5.6 on page 37. During normal operation, the active drive is displayed in the upper half of the LCD display. Battery charge level is shown in the Battery Gauge Display (BGD) located on the right side of the LCD display. At full charge, solid blocks fill in all ten segments between E (Empty) and F (Full). As the battery becomes discharged, the top most segments will progressively disappear until no segments appear between E and F. At this level, the user should charge the batteries as soon as possible. The lower half of the LCD display is the Information Center. The Information Center displays current data on the wheelchair. Refer to LCD Display table on page 36 for descriptions of information shown. LCD DISPLAY ITEM DRIVE NAME DESCRIPTION This field shows the currently selected Drive's Name. Available choices are as follows: Drive 1* Drive 2* Drive 3* BATTERY LEVEL INDICATOR STATUS MESSAGE Drive 4* "No Drive" selected via the programmer. *NOTE: Drive names can be customized. Actual drive names may display differently. This symbol shows the Battery Level and will change depending on the available battery power. This indicator is shown on every screen. This area displays status or instructions. Pronto® M94™ 36 Part No 1122145

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
SECTION 5—WHEELCHAIR OPERATION
Pronto® M94™
36
Part No 1122145
Splash Screen
NOTE: For this procedure, refer to
FIGURE 5.5.
This screen is displayed at startup of the
joystick for about 2 seconds. This screen
displays the software version and date
information.
After this screen, the joystick displays the
Main Screen.
FIGURE 5.5
LCD Display Screens - Splash
Screen
Main Screen
NOTE: For this information, refer to FIGURE 5.6 on page 37.
During normal operation, the active drive is displayed in the upper half of the LCD
display. Battery charge level is shown in the Battery Gauge Display (BGD) located on the
right side of the LCD display. At full charge, solid blocks fill in all ten segments between
E (Empty) and F (Full). As the battery becomes discharged, the top most segments will
progressively disappear until no segments appear between E and F. At this level, the user
should charge the batteries as soon as possible.
The lower half of the LCD display is the Information Center. The Information Center
displays current data on the wheelchair.
Refer to LCD Display
table on page 36 for descriptions of information shown.
LCD DISPLAY
ITEM
DESCRIPTION
DRIVE NAME
This field shows the currently selected Drive’s Name.
Available choices are as follows:
Drive 1*
Drive 2*
Drive 3*
Drive 4*
“No Drive” selected via the programmer.
*NOTE: Drive names can be customized. Actual drive names may display differently.
BATTERY LEVEL
INDICATOR
This symbol shows the Battery Level and will change depending on the available
battery power.
This indicator is shown on every screen.
STATUS MESSAGE
This area displays status or instructions.