Invacare M94 Owners Manual - Page 46
Adjusting Van Seat Armrests
View all Invacare M94 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
SECTION 6-ARMS 3. Lock top of flip back armrest by pushing height adjustment lever into the Down (vertical) position. 4. Lift up on flip back armrest to make sure the armrest is locked in place. 5. Repeat STEPS 1‐4 for opposite flip back armrest, if necessary. Height Adjustment Lever Flip Back Armrest Release Lever Locked (Down - Vertical) Flip Back Armrest Front Arm Socket Unlocked (Up - Horizontal) FIGURE 6.2 Adjusting Flip Back Armrests Adjusting Van Seat Armrests Angle ƽ WARNING Pinch point may occur when adjusting the arm angle position. NOTE: For this procedure, refer to Detail "A" of FIGURE 6.3 on page 47. 1. Lift up the armrest. 2. Loosen the jam nut. 3. Adjust the socket screw up or down to the desired arm angle position. 4. Tighten the jam nut. 5. To determine the same angle for the opposite armrest, count the exposed threads after the jam nut has been tightened. 6. Repeat STEPS 1‐4 for opposite armrest, if necessary. Height NOTE: For this procedure, refer to Detail "B" of FIGURE 6.3 on page 47. 1. Remove the socket screw that secures the armrest to the seat frame assembly. 2. Adjust the armrest to one of four positions. 3. Reinstall the socket screw that secures the armrest to the seat frame assembly and tighten securely. Pronto® M94™ 46 Part No 1122145