Invacare M94 Owners Manual - Page 71
Invacare M94 Manual
View all Invacare M94 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
DETAIL"A" - BATTERIES WITH BUILT-IN LIFTING STRAPS Rear Battery Built-in Lifting Straps Battery Tray Front Battery SECTION 11-BATTERIES DETAIL"B" - BATTERIES WITHOUT BUILT-IN LIFTING STRAPS Battery Lifting Straps Battery Terminals/Posts Battery FIGURE 11.1 Installing/Removing the Batteries 9. Connect the front battery to the controller (RED connector). Refer to FIGURE 11.2. 10. Connect the rear battery to the front battery (RED and BLACK connectors). Refer to FIGURE 11.2. 11. Reinstall the top shroud. Refer to Removing/Installing the Shrouds on page 65. 12. Reinstall the seat. Refer to Removing/Installing the Seat Assembly on page 50. 13. Connect the joystick. Refer to Disconnecting/Connecting the Joysticks on page 42. NOTE: New battery(ies) MUST be fully charged before using, otherwise the life of the battery(ies) will be reduced. 14. If necessary, charge the battery(ies). Refer to Charging Batteries on page 74. Connector from Battery to Controller Front of Wheelchair RED Controller Connector (Not Shown) Front Battery Tie Wrap RED Front POSITIVE (+) Battery Terminal Mounting Screw, Nut and Fuse Hardware (Terminal Cap Shown) RED Battery Connector RED Rear POSITIVE (+) Battery Terminal Mounting Screw, Nut and Fuse Hardware* Rear of Wheelchair BLACK Front NEGATIVE (-) Battery Terminal Mounting Screw, Nut and Fuse Hardware (Terminal Cap Shown) Tie Wrap BLACK Battery Connector GREY Rear NEGATIVE (-) Battery Terminal Mounting Screw, Nut and Fuse Hardware* Rear Battery *NOTE: Terminal cap shown removed for clarity. Retaining Strap FIGURE 11.2 Installing/Removing the Batteries Part No 1122145 71 Pronto® M94™