Invacare M94 Owners Manual - Page 53
Adjusting Seat Depth - Van Seat Only
View all Invacare M94 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
DETAIL "A" SEAT ASSEMBLY SECTION 7-SEAT Seat Assembly Seat Frame Washer Seat Positioning Strap Mounting Screws DETAIL "B" - SEAT POSITIONS * DO NOT Use Use these Mounting Holes for 1-inch-back Seat Position Use these Mounting Holes for Standard Seat Position * DO NOT Use Bottom View of Seat Assembly Front of Seat DO NOT Use these mounting holes. * DO NOT Use Use these Mounting Holes for 1-inch-back Seat Position Use these Mounting Holes for Standard Seat Position * DO NOT Use Use these Mounting Holes for 1-inch-back Seat Position Use these Mounting Holes for 1-inch-back Seat Position Use these Mounting Holes for Standard Seat Position Use these Mounting Holes for Standard Seat Position Rear of Seat *NOTE: Only the 22‐inch wide seats have these mounting holes. DO NOT use these mounting holes. FIGURE 7.6 Adjusting Seat Position on Seat Frame Adjusting Seat Depth - Van Seat Only NOTE: For this procedure, refer to FIGURE 7.7 on page 54. 1. Remove the seat. Refer to Removing/Installing the Seat Assembly on page 50. 2. Remove the seat base from the seat assembly. Refer to Adjusting Seat Position on Seat Frame on page 52. 3. Remove the six mounting screws located under the seat that secure the seat back assembly in place. Part No 1122145 53 Pronto® M94™