Invacare MA95Z Owners Manual - Page 17

Installing the Side Rails, Installing the Power Unit, Connecting the Hose

Page 17 highlights

4.3 Installing the Side Rails Refer to the Bed Rail Entrapment Risk Notification Guide at www.invacare.com for additional safety information. Refer to the instructions provided with the side rails for the installation procedure. 4.4 Installing the Power Unit Setup 4.5 Connecting the Hose CAUTION! Risk Of Injury Or Damage To prevent falling, stepping on the hose, or causing other injuries or damage: - Ensure that the hose connecting the control unit to the mattress is routed such that it cannot be stepped on, kinked, squeezed or otherwise damaged. 1. Pull out the bed hook A on the back of the control unit. 2. Place the control unit on the footboard. If the bed does not have a footboard, place the control unit on a flat surface, leaving room for the hose to hang down. 1148139-H 17

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40

Setup
4.3
Installing the Side Rails
Refer to the
Bed Rail Entrapment Risk Notification
Guide
at www.invacare.com for additional safety
information.
Refer to the instructions provided with the side rails
for the installation procedure.
4.4
Installing the Power Unit
1.
Pull out the bed hook
A
on the back of the control unit.
2.
Place the control unit on the footboard.
If the bed does not have a footboard, place the
control unit on a flat surface, leaving room for
the hose to hang down.
4.5
Connecting the Hose
CAUTION!
Risk Of Injury Or Damage
To prevent falling, stepping on the hose, or
causing other injuries or damage:
– Ensure that the hose connecting the control
unit to the mattress is routed such that it
cannot be stepped on, kinked, squeezed or
otherwise damaged.
1148139-H
17