Invacare MA95Z Owners Manual - Page 25

Automatic Wireless Fowler, Manual Operation of the Fowler, Automatic Wireless Mode, Programming

Get Invacare MA95Z PDF manuals and user guides View all Invacare MA95Z manuals
Add to My Manuals
Save this manual to your list of manuals

Page 25 highlights

• Select a different setting to exit Max Inflate mode, or press the Max Inflate button again. This will deactivate the Max Inflate LED. • It is recommended that Max Inflate setting be used during patient ingress/egress, patient wound care, patient turning or patient cleaning. 5.1.11 Automatic Wireless Fowler Manual Operation of the Fowler 1. Press the Function button F to move the pointer on the LCD to Function. 2. Use the Firm and Soft buttons until Fowler displays. When this mode is activated, the control unit increases the pressure in the mattress to prevent the patient from bottoming out. Automatic Wireless Mode When the bed articulates to 45°, the transmitter in the head of the mattress signals the control unit to add 25% more air into the mattress to prevent the patient from bottoming out. Programming the Automatic Wireless Fowler Transmitter 1. Ensure the mattress is in a flat position. 2. Make sure fowler transmitter is in the mattress cover pocket in the orientation indicated on the transmitter. Mattress cover pocket is on the inside of the mattress cover on the bottom left side at the head end. 1148139-H Usage 3. Ensure the control unit is plugged in, and the LCD displays STAND BY. 4. Perform one of the following: • MA90Z Power Unit - Perform the following steps: a. Press and hold the Turn Angle and Max Inflate buttons. The Fowler LED is lit and L displays in the LCD Display. b. Raise the bed to 45°. The control unit will beep and will return to Standby. c. Perform one of the following: - Cancel-Press the Turn Angle button to exit Fowler Transmitter Setup without linking to a transmitter. - Save-Wait 60 seconds without pressing a key. • MA95Z Power Unit-Perform the following steps: a. Press and hold the Hold and Max Inflate buttons. b. AUTO FOWLER LEARN MODE will display. c. PLACE BED IN FLAT POSITION will display. d. CONTINUE -> SELECT will display. e. Press the Function button. f. PLACE BED IN FOWLER/UPRIGHT POSITION will display. g. TRANSMITTER DETECTED will display. h. The control unit will beep. i. STAND BY will display. 25

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
Usage
•
Select a different setting to exit Max Inflate mode, or
press the Max Inflate button again. This will deactivate
the Max Inflate LED.
•
It is recommended that Max Inflate setting be used
during patient ingress/egress, patient wound care,
patient turning or patient cleaning.
5.1.11
Automatic Wireless Fowler
Manual Operation of the Fowler
1.
Press the Function button
F
to move the pointer on
the LCD to Function.
2.
Use the Firm and Soft buttons until Fowler displays.
When this mode is activated, the control unit
increases the pressure in the mattress to prevent
the patient from bottoming out.
Automatic Wireless Mode
When the bed articulates to 45°, the transmitter in the head
of the mattress signals the control unit to add 25% more air
into the mattress to prevent the patient from bottoming out.
Programming the Automatic Wireless Fowler Transmitter
1.
Ensure the mattress is in a flat position.
2.
Make sure fowler transmitter is in the mattress cover
pocket in the orientation indicated on the transmitter.
Mattress cover pocket is on the inside of the
mattress cover on the bottom left side at the
head end.
3.
Ensure the control unit is plugged in, and the LCD
displays STAND BY.
4.
Perform one of the following:
•
MA90Z Power Unit - Perform the following steps:
a. Press and hold the Turn Angle and Max Inflate
buttons.
The Fowler LED is lit and L displays in
the LCD Display.
b. Raise the bed to 45°.
The control unit will beep and will return
to Standby.
c. Perform one of the following:
– Cancel—Press the Turn Angle button to exit
Fowler Transmitter Setup without linking to
a transmitter.
– Save—Wait 60 seconds without pressing a key.
•
MA95Z Power Unit—Perform the following steps:
a. Press and hold the Hold and Max Inflate buttons.
b. AUTO FOWLER LEARN MODE will display.
c. PLACE BED IN FLAT POSITION will display.
d. CONTINUE -> SELECT will display.
e. Press the Function button.
f.
PLACE BED IN FOWLER/UPRIGHT POSITION will
display.
g. TRANSMITTER DETECTED will display.
h. The control unit will beep.
i.
STAND BY will display.
1148139-H
25