Invacare TDXSIV-HD-S Owners Manual 2 - Page 59

Disengaging/Engaging Motor Lock Levers, TDX SI/TDX SI-2 without SSD Motors and All TDS SI with SSD

Get Invacare TDXSIV-HD-S PDF manuals and user guides View all Invacare TDXSIV-HD-S manuals
Add to My Manuals
Save this manual to your list of manuals

Page 59 highlights

5.7 Disengaging/Engaging Motor Lock Levers 5 WHEELCHAIR OPERATION TDX SI/TDX SI-2 without SSD Motors and All TDS SI with SSD Motors ƽ WARNING DO NOT engage or disengage motor locks until the power is in the OFF position.  For this procedure, refer to FIGURE 13. Motor lock disengagement/engagement allows free-wheeling or joystick controlled operation. Free-wheeling allows an assistant to maneuver the wheelchair without power. Motor lock levers are located between the rear caster assembly and drive wheel on both sides of the wheelchair. 1. Perform one of the following as if viewing the motors from behind the wheelchair (Detail "A"): • Engage (DRIVE) - Move the motor lock levers DOWN to engage the motors and drive the wheelchair. • Disengage (PUSH) - Move the motor lock levers UP to disengage the motors and push the wheelchair. -  Wheelchair without SSD motors shown. Rear Caster Drive Wheel DISENGAGE MOTOR (Push) Move Motor Lock Lever UP ENGAGE MOTOR (Drive) Move Motor Lock Lever DOWN Motor Lock Lever Motor Lock Lever FIGURE 13 Disengaging/Engaging Motor Lock Levers - TDX SI/TDX SI-2 without SSD Motors and All TDS SI with SSD Motors Part No 1154294 59 Invacare® TDX®SI Series

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
5
WHEELCHAIR OPERATION
Part No 1154294
59
Invacare® TDX®SI Series
5.7
Disengaging/Engaging Motor Lock Levers
TDX SI/TDX SI-2 without SSD Motors and All TDS SI with SSD Motors
1.
Perform one of the following as if viewing the motors from behind the wheelchair (Detail “A”):
•
Engage (DRIVE) - Move the motor lock levers DOWN to engage the motors and drive the wheelchair.
•
Disengage (PUSH) - Move the motor lock levers UP to disengage the motors and push the wheelchair.
-
FIGURE 13
Disengaging/Engaging Motor Lock Levers - TDX SI/TDX SI-2 without SSD Motors and All TDS SI with SSD Motors
±
WARNING
DO NOT engage or disengage motor locks until the power is in the OFF position.
For this procedure, refer to FIGURE 13.
Motor lock disengagement/engagement allows free-wheeling or joystick controlled operation. Free-wheeling allows an
assistant to maneuver the wheelchair without power.
Motor lock levers are located between the rear caster assembly and drive wheel on both sides of the wheelchair.
Rear
Caster
Drive Wheel
DISENGAGE MOTOR (Push) -
Move Motor Lock Lever UP
ENGAGE MOTOR (Drive) -
Move Motor Lock Lever DOWN
Motor Lock Lever
Motor Lock Lever
Wheelchair without SSD motors shown.