Invacare TDXSIV-HD-S Owners Manual 2 - Page 96

CMPJ+ Joysticks

Get Invacare TDXSIV-HD-S PDF manuals and user guides View all Invacare TDXSIV-HD-S manuals
Add to My Manuals
Save this manual to your list of manuals

Page 96 highlights

7 SETUP/MAINTENANCE CMPJ+ Joysticks  For this procedure, refer to FIGURE 10. Disconnecting 1. Pull the latch away from the joystick connector. 2. Disconnect the joystick connector from the remaining connectors Connecting  Ensure the gaskets are installed in the top connector cap and between network connectors. 1. Ensure the latch is pulled away from the network connector. 2. Connect the network connector to the other connectors. 3. Top and Bottom Connectors - Install connector caps onto the network connector. 4. Push the latch in to secure the network connectors and caps. 5. If necessary secure excess cable using tie-wraps. Top Connector Cap Network Connectors Latch Gasket Controller Cable Gasket Bottom Connector Cap Gasket FIGURE 10 Disconnecting/Connecting the Joysticks - CMPJ+ Joysticks Invacare® TDX®SI Series 96 Part No 1154294

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
7
SETUP/MAINTENANCE
Invacare® TDX®SI Series
96
Part No 1154294
CMPJ+ Joysticks
Disconnecting
1.
Pull the latch away from the joystick connector.
2.
Disconnect the joystick connector from the remaining connectors
Connecting
1.
Ensure the latch is pulled away from the network connector.
2.
Connect the network connector to the other connectors.
3.
Top and Bottom Connectors - Install connector caps onto the
network connector.
4.
Push the latch in to secure the network connectors and caps.
5.
If necessary secure excess cable using tie-wraps.
FIGURE 10
Disconnecting/Connecting the Joysticks - CMPJ+
Joysticks
For this procedure, refer to FIGURE 10.
Ensure the gaskets are installed in the top
connector cap and between network connectors.
Top Connector
Cap
Latch
Gasket
Network
Connectors
Gasket
Controller
Cable
Gasket
Bottom
Connector
Cap