Invacare TDXSIV-HD-S Owners Manual 2 - Page 79

Inspect/Adjust Every 18 Months

Page 79 highlights

7 SETUP/MAINTENANCE  Check center mount front riggings for loose fasteners. Replace /tighten if necessary.  Check that cables are routed and secured properly to ensure that cables DO NOT become entangled and damaged during normal operation of seating system.  Ensure proper operation of powered functions (drive, seating, legrests, ect...).  Inspect motor brushes and gearbox coupling.  Inspect electrical components for signs of corrosion. Replace if corroded or damaged.  Inspect battery terminals for loose cable connection. Tighten if necessary.  Inspect all fasteners.  Inspect TRBKTS fasteners and hardware.  Inspect foam handgrips for damage. If damaged, have them replaced by a qualified technician.  Ensure swing arm stops are in place and not deteriorated or damaged. Replace if necessary. Inspect/Adjust Every 18 Months  Replace motor brushes and gearbox coupling. Part No 1154294 79 Invacare® TDX®SI Series

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104

7
SETUP/MAINTENANCE
Part No 1154294
79
Invacare® TDX®SI Series
Check center mount front riggings for loose fasteners. Replace /tighten if necessary.
Check that cables are routed and secured properly to ensure that cables DO NOT become entangled and damaged during normal operation of
seating system.
Ensure proper operation of powered functions (drive, seating, legrests, ect...).
Inspect motor brushes and gearbox coupling.
Inspect electrical components for signs of corrosion. Replace if corroded or damaged.
Inspect battery terminals for loose cable connection. Tighten if necessary.
Inspect all fasteners.
Inspect TRBKTS fasteners and hardware.
Inspect foam handgrips for damage. If damaged, have them replaced by a qualified technician.
Ensure swing arm stops are in place and not deteriorated or damaged. Replace if necessary.
Inspect/Adjust Every 18 Months
Replace motor brushes and gearbox coupling.