JVC FS-A52 Instruction Manual - Page 10
Connecting Antennas, To connect an outdoor AM antenna, AM antenna
View all JVC FS-A52 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Connecting Antennas FM antenna ANTENNA AMALMOOEPXT FM antenna (supplied) AM antenna 1 2 CFOMA(7X5IAΩL) ANTENNA AMALMOOEPXT Vinyl-covered wire (not supplied) 1 Attach the FM antenna to the FM (75 Ω) COAXIAL terminal. 2 Extend the FM antenna. 3 Fasten it up in the position which gives you the best reception. CFOMA(7X5IAΩL) 3 About the supplied FM antenna The FM antenna supplied with this unit can be used as temporary measure. If reception is poor, you can connect an outdoor FM antenna. To connect an outdoor FM antenna Before connecting it, disconnect the supplied FM antenna. Outdoor FM antenna (not supplied) ANTENNA AMALMOOEPXT CFOMA(7X5IAΩL) AM loop antenna (supplied) 1 If cords are covered with insulation, twist the core of the cord at the end of each cord, then remove the insulation. 2 Connect the AM loop antenna to the AM LOOP terminals as illustrated. 3 Turn the AM loop antenna until you have the best reception. To connect an outdoor AM antenna When reception is poor, connect a single vinyl-covered wire to the AM EXT terminal and extend it horizontally. The AM loop antenna must remain connected. For better reception of both FM and AM • Make sure the antenna conductors do not touch any other terminals and connecting cords. • Keep the antennas away from metallic parts of the unit, connecting cords, and the AC power cord. A 75 Ω antenna with coaxial type connector should be used. - 7 -