JVC FS-A52 Instruction Manual - Page 32

To record a single track during play or pause While playing back you want to record, perform steps 3 and 4. The playback of the track is stopped, and then starts from the beginning again. This time, the cassette deck starts recording the track. • After the track is recorded, both the CD player and the cassette deck stop automatically. To check the clock time while recording from the CD onto a tape On the remote control ONLY: Press DISPLAY (not on number buttons.) • Each time you press the button, the recording information and the clock time alternate on the display. Recording External Equipment You can record from external equipment onto a tape. The external equipment needs to be connected to LINE IN (AUX) terminal of this unit (for how to connect, see page 9.) On the unit ONLY: 1 Insert a recordable cassette into the cassette loading slot. • Press TAPE @ # to adjust the tape direction to " " then 7. 2 Press AUX/MD. The source is changed to "AUX." 3 Press MODE select to select a recording mode. • Each time you press the button, recording mode changes as follows: MODE1/2 MODE2/2 Canceled Tape indicator Recording mode Reverse mode Ex. When selecting MODE 1/2 4 Press REC start. The recording starts. 5 Start playback on the external equipment. To stop recording, press 7. To check the clock time while recording from the external equipment onto a tape On the remote control ONLY: Press DISPLAY (not on number buttons.) • Each time you press the button, the recording information and the clock time alternate on the display. - 29 -