JVC FS-A52 Instruction Manual - Page 12
Connecting Other Equipment, NOW, you can plug the AC power cord.
View all JVC FS-A52 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Connecting Other Equipment You can connect both of the analog and digital equipment. When you connect and use the equipment, refer also to its manual supplied. • DO NOT connect other equipment while the power is on. • DO NOT plug in any equipment until all connections are complete. To connect analog audio equipment Be sure that the plugs of the audio cords and the jacks on the rear of the unit are color-coded: White plugs and jacks are for left audio signals, and red ones for right audio signals. To connect audio equipment with an optical digital input terminal You can record CD sound onto the connected digital equipment. Connect an optical digital cord (not supplied) between the optical digital input terminal on the other equipment and the OPTICAL DIGITAL OUT terminal. OPTICAL DIGITAL OUT terminal Protective cap Before connecting the other equipment, remove the protective cap from the terminal. LINE IN (AUX) R L SPEAKER IMPEDANCE MIN 4 R L Audio equipment with an optical digital input NOW, you can plug the AC power cord. IMPORTANT: Be sure to check all connections to be done before plugging the AC power cord into a wall outlet. SPEAKER IMPEDANCE MIN 4 R L AC IN AC power cord (supplied) Analog audio equipment To output AC IN 2 To a wall outlet 1 To the AC IN terminal For playing the other equipment through this unit, connect between the audio output jacks on the other equipment and the LINE IN (AUX) jacks by using an audio cord (not supplied.) When connecting the AC power cord into a wall outlet, the unit automatically starts the display illumination. To stop and cancel the display demonstration, press COLOR during display illumination-while the unit is turned off (on standby.) To start the display illumination manually, press COLOR again while the unit is turned off (on standby.) - 9 -