JVC FS-A52 Instruction Manual - Page 11

Continued Connecting Speakers To connect speakers You can connect the speakers by following the procedure below: 1 To remove the speaker grilles The speaker grilles are removable. Holes Projections 2 Speaker terminals 3,4 Speaker grille To remove the speaker grille, insert your fingers at the top of the speaker grille, then pull towards you. Do the same at the bottom. To attach the speaker grille, put the projections of the speaker grille into the holes of the speaker. Speaker cord SPEAKER IMPEDANCE MIN 4Ω + + R L - - Speaker cord R L Rear of the right speaker Rear of the left speaker 1 If cords are covered with insulation, twist the core of the cord at the end of each cord, then remove the insulation. 2 Open the speaker terminal. 3 Insert the end of the speaker cord to the terminal. Match the polarity: White cord to (+) terminal and black cord to (-) terminal. 4 Close the speaker terminal on the rear of the unit. Use only speakers with the speaker impedance-4 Ω to16 Ω. - 8 -