JVC GR-D775 Instructions - Page 35

MENUS FOR DETAILED ADJUSTMENT EN 35 Playback Menus VTR The settings below are effective only for video playback except "REC MODE". The parameters (except "SOUND L/R", "[T] ➝ [M] COPY" and "NARRATION" settings) are the same as in the description on page 33. DISPLAY Each setting (except "OFF" in "ON SCREEN", "DATE/TIME" and "TIME CODE") is linked with "DISPLAY", which appears when the Power Switch is set to "REC". The parameters (except "OFF" in "ON SCREEN" setting) are the same as in the description on ੬ pg. 34. SOUND L/R and NARRATION During tape playback, the camcorder detects the sound mode in which the recording was made, and plays the sound back. Select the sound to accompany your playback picture. ON SCREEN OFF / [LCD] / LCD/TV When set to "OFF", the camcorder's display disappears. DATE/TIME [OFF] / ON REC MODE [SP]* / LP Allows you to set the video recording mode (SP or LP) depending on your preference. It is recommended you use "REC MODE" in VIDEO Menu when using this camcorder as a recorder during dubbing. (੬ pg. 42, 43) * SP indicator does not appear on the screen. NARRATION [OFF]: Original sound is output on both "L" and "R" channels in stereo. ON: Dubbed sound is output on both "L" and "R" channels in stereo. (੬ pg. 45). MIX: Original and dubbed sounds are combined and output in stereo on both "L" and "R" channels. [T] ➝ [M] COPY CLOCK ADJ. ੬ pg. 15, "Date/Time Settings" TIME CODE [OFF] / ON ੬ pg. 20, "Time Code" 16:9 OUTPUT 4:3 TV / [16:9 TV] ੬ pg. 34, "16:9 OUTPUT" BRIGHT ੬ pg. 15, "Brightness Adjustment Of The Display" SYSTEM Each setting (except "DEMO MODE") is linked with "SYSTEM", which appears when the Power Switch is set to "REC". [OFF]: When the SNAPSHOT button is pressed during tape playback, the playback image pauses and normal playback will resume after approximately 6 seconds. (The still image is not recorded.) ON: Enables dubbing of images recorded on a tape to a memory card. (੬ pg. 42). The parameters are the same as in the description on page 34. ADVANCED FEATURES SOUND L/R [STEREO ]: Sound is output on both "L" and "R" channels in stereo. SOUND L : Sound from the "L" channel is output. SOUND R : Sound from the "R" channel is output.