JVC GR-D775 Instructions - Page 42

42 EN FEATURES FOR RECORDINGS Dubbing Still Images Recorded On A Tape To A Memory Card Still images can be dubbed from a tape to a memory card. 1 Load a cassette. (੬ pg. 16) 2 Load a memory card. (੬ pg. 17) 3 Set the VIDEO/MEMORY Switch to "VIDEO". 4 Set the Power Switch to "PLAY" while pressing down the Lock Button located on the switch. 5 Set "[T] ➝ [M] COPY" to "ON". (੬ pg. 35) 6 Press 6 to start playback. 7 At the point you want to dub, press 6 again to engage Still Playback. 8 To dub the image, press SNAPSHOT. ● The " " indication appears during dubbing. NOTE: To use Playback Special effects with a video image you wish to dub, perform up to step 8 using the remote control. (੬ pg. 24) EDITING Dubbing To A VCR To use this camcorder as a player 1 Following the illustration, ੬ pg. 23, "Connections To A TV Or VCR" , connect the camcorder and the VCR's input connectors. 2 Perform steps 1 - 6 (੬ pg. 23) 3 At the point you want to start dubbing, start recording on the VCR. (Refer to the VCR's instruction manual.) 4 To stop dubbing, stop recording on the VCR, then stop playback on the camcorder. NOTES: ● It is recommended to use the AC Adapter as the power supply instead of the battery pack. (੬ pg. 13) ● To choose whether or not the following displays appear on the connected TV • Date/time Set "DATE/TIME" to "ON" or "OFF" (੬ pg. 35). Or, press DISPLAY on the remote control to turn on/off the date indication. • Time code Set "TIME CODE" to "OFF" or "ON" (੬ pg. 35). • Indications other than date/time and time code Set "ON SCREEN" to "OFF", "LCD" or "LCD/ TV" (੬ pg. 35).