JVC GR-D775 Instructions - Page 36

36 EN FEATURES FOR RECORDING LED Light LED Light can be used to brighten the subject in the dark place during video recording or D.S.C. shooting. LIGHT LED Light 1 Press LIGHT repeatedly to change the setting. The light is on always. ( appears.) The light turns on automatically when dark. ( appears.) Turns off the light. 2 Press the Recording Start/Stop Button to start video recording or SNAPSHOT to shoot a still image. NOTES: ● Be careful not to point the LED Light directly to eyes. ● If the light does not reach the subject when the LED Light setting is "ON", the Night-Alive function will be activated, and makes it possible to shoot the subject brighter. ● Since subjects are shot at a reduced shutter speed when the LED Light setting is "ON", they will appear slightly blurred. Snapshot (Record Still Image On Tape) This feature lets you record still images that look like photographs onto a tape. 1 Set the VIDEO/MEMORY Switch to "VIDEO". 2 Set the Power Switch to "REC". M 3 Set the recording mode to " ". (੬ pg. 20) 4 Set "REC SELECT" to " / " or " ". (੬ pg. 31, 33) 5 Press SNAPSHOT. ● The "PHOTO" indication appears and a still image will be recorded for approx. 5 seconds, then the camcorder re-enters the Record-Standby mode. ● You can perform Snapshot also during recording. A still image will be recorded for approx. 5 seconds, then the normal recording resumes. A M ● Snapshot is effective when the recording mode selection is set to both " " or " ". ● If the image taken by snapshot is too dark or too bright, select (੬ pg. 38) or "SPOTLIGHT" (੬ pg. 41). ● The image size for snapshot in 16:9 mode is 640X360. However, the approximate number of storable images is similar with snapshot in 4:3 mode. (੬ pg. 26) Motor Drive Mode Keeping SNAPSHOT pressed in step 5 provides an effect similar to serial photography. (Interval between still images: approx. 1 second) ● The Motor Drive mode is disabled when "REC SELECT" is set to " / " or " ". (੬ pg. 33)